Howto give PING/ICMP high Priority use in Mikrotik Router firewall Configuration

This article provide  Howto give PING/ICMP high Priority use in  Mikrotik Router firewall configuration.


/ip firewall mangle
add chain=prerouting action=mark-connection new-connection-mark=ICMP_PING passthrough=yes protocol=icmp


add chain=prerouting action=mark-packet new-packet-mark=ICMP_PKT passthrough=no protocol=icmp connection-mark=ICMP_PING


/queue simple

  add name="ICMP" target-addresses=192.168.1.0/24
      interface=all parent=Total packet-marks=ICMP_PKT direction=both priority=1 queue=default-small/default-small
      limit-at=0/0 max-limit=2M/2M burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s total-queue=default-small